The Format for 3D Printing? 3D Printable Dungeon Tiles & Terrain › Forums › 3D Printing › 3D Printing › The Format for 3D Printing? This topic contains 3 replies, has 3 voices, and was last updated by Rob 4 months, 2 weeks ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts 24th November 2018 at 6:08 am #770 dollerjony Total posts: 5 Participant What construction do I use for 3D printing? Which file arrangements should I export from my CAD program for printing in the 3D printer? 24th November 2018 at 12:30 pm #775 Rob Total posts: 40 Keymaster Export an STL file and then convert it to a gcode using Cura or whatever slicing software you prefer to use. 2nd December 2018 at 11:36 am #862 RiyuChan Total posts: 0 Participant It depends on the software you use, I use blender and use the follow guide : https://www.youtube.com/watch?v=FGiTVY9gSko 3rd December 2018 at 11:41 am #901 Rob Total posts: 40 Keymaster Blender is awesome and I will try and start using it more in the future! Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.